Elgin regenerative air sweepers give contractors, municipalities, and airports a powerful sweeper with versatility and productivity.
Crosswind1
Reliable, Versatile.
Learn moreRegenX
Easy to use, East to clean.
Learn moreRegenX1
Single Engine, Easy to Maintain.
Learn moreRegenerative Air Sweepers for High-Performance Cleaning
Elgin regenerative air sweepers are designed for high-efficiency debris removal with minimal dust and maximum productivity. Engineered for demanding municipal, industrial, and highway applications, these sweepers combine powerful airflow, wide sweeping paths, and large hopper capacities to deliver consistent, high-quality cleaning at highway speeds. Compare key specifications below to determine which regenerative air sweeper best matches your operational needs.
-
Regenerative Air Crosswind 1® RegenX® RegenX1® Engine (chassis) Cummins ISB 6.7
200 hp @ 2400 RPMJohn Deere 4045T
74 hp @ 2400 RPMCummins ISB 6.7
200 hp @ 2400 RPMSweep System Regenerative Air Regenerative Air Regenerative Air Sweeping Path (max) 12 ft 12 ft 12 ft Hopper Capacity 8 cu yd 8 cu yd 8 cu yd Water Capacity 240 gal 250 gal 265 gal Hopper Dump Angle 50° 50° 50° Hopper Dump (location) Rear ground Rear, mid-dump 56 in Rear, mid-dump 56 in Chassis Conventional / Cab-over Conventional Conventional Travel Speed Highway Highway Highway
Elgin regenerative air sweepers give contractors, municipalities, and airports a powerful sweeper with versatility and productivity.
-
Crosswind1
Reliable
Versatile -
RegenX
Easy to Use
Easy to Clean -
RegenX1
Single Engine
Easy to Maintain
Product Overview
Elgin regenerative air sweepers give contractors, municipalities, and airports a powerful sweeper with versatility and productivity. The Elgin® Crosswind1® efficiently cleans large flat paved areas such as streets, parking lots, and airport runways. Mounted on the short-wheelbase of either conventional or cab-over chassis, the Elgin Crosswind1 is operated by simple rocker switches and equipped with all the essentials to get the job done right. A combination of a large 8 yd3 (6 m3) hopper and 240 gal (908 L) water tank, plus excellent fuel efficiency, allow maximum productivity between trips to dumping, re-watering, and fueling.
The Crosswind1 steps ahead as the market leader with innovative single-engine technology. This new easy-to-use design, with single-button operation, will increase productivity and decrease maintenance time and costs. The Crosswind1 sweeper is also effective in the frequent maintenance of permeable pavement. This sweeper is versatile and can easily pick up litter and chip seal. The large pickup head makes it desirable for many applications.
Why Crosswind
- • Superior dust suppression
- • Tilt body for traditional dumping of sweepings
- • Dual-engine platform with patented SharedPower technology available
The Crosswind1 Eliminates:
- • Maintaining two engines
- • Complex aftertreament system, and maintenance
- • Untimely auxiliary engine regenerations
- • Cost exposure resulting from “missed” auxiliary engine regenerations
- • Cumbersome belt tensioning systems
- • Auxiliary engine noise and vibration
Product Overview
The Elgin Innovation Team traversed the country, speaking to hundreds of customers at all levels within the street sweeping industry, both municipal and contractor, in pursuit of true voice-of-the-customer insights. Extensive real-world prototype testing and feedback refined the sweeper design to provide customers with exactly what they want and need while proving reliability and durability along the way. The input of service technicians, operators, and street sweeping supervisors shaped every detail of the new RegenX® mid-dump regenerative air street sweeper from Elgin Sweeper Company, a sweeper that is easy to use, easy to clean, and easy to maintain but still delivers the quality and proven technology that is the hallmark of Elgin Sweeper products.
The new RegenX was built by Elgin, but designed by you.
Why RegenX
- Available on Non-CDL*, 26K GVW Chassis
- • *May vary based on local rules and regulations.
- Roll-Off Dump Height with 50° Dump Angle and 8yd3 Hopper
- • Avoid double-handling, driving back to the facility to dump, and environmental ground-dumping restrictions
- Incredibly Easy to Clean
- • Simple hopper – rounded corners and external self-dumping dust separator
- • Easy-access washout doors for dust separator and pickup head
- • Cable-controlled drop-down screens standard
- Easy to Service
- • Easy to access components with locations determined by experienced service technicians
- • Bolt-on wear parts wherever possible (dust separator, hopper inlet, etc.)
- • Simple design with no control modules for sweeper functions
- Reliable
- • Better cleanout and easier serviceability leads to more reliability
- • Highly efficient dust separator and large screen surface area reduce carryover and sandblasting
- • Overall simple design – fewer moving parts, more uptime
Product Overview
The Elgin innovation team traversed the country, speaking to hundreds of customers at all levels within the street sweeping industry, both municipal and contractor, in pursuit of true voice-of-the-customer insights. Years of real-world prototype testing and feedback refined the sweeper design to provide customers with exactly what they want and need while proving reliability and durability along the way.
The input of service technicians, operators, and street sweeping supervisors shaped every detail of the new RegenX1® mid-dump regenerative air street sweeper. Easy to use, easy to clean, and easy to maintain while delivering the quality and proven technology that is the hallmark of Elgin Sweeper products.
The new RegenX1 was built by Elgin, but designed by you.
SINGLE-ENGINE 4 WHEEL VACUUM SWEEPER
ELIMINATES:
- • Maintaining two engines
- • Complex aftertreatment system and maintenance
- • Untimely auxiliary engine regenerations
- • Cost exposure resulting from “missed” auxiliary engine regenerations
- • Cumbersome belt tensioning systems
- • Auxiliary engine noise and vibration
Reliable, Serviceable, Simple.
Why RegenX1
- Roll-off Dump Height with 50° Dump Angle and 8 yd3 Hopper
- • Avoid double-handling, driving back to the facility to dump, and environmental ground-dumping restrictions
- Incredibly Easy to Clean
- • Simple hopper – rounded corners and external self-dumping dust separator
- • Easy-access washout doors for dust separator and pickup head
- • Cable-controlled drop-down screens standard
- Easy to Service
- • Easy to access components with locations determined by experienced service technicians
- • Bolt-on wear parts wherever possible (dust separator, hopper inlet, etc.)
- Reliable
- • Better cleanout and easier serviceability
- • Highly efficient dust separator and large screen surface area reduce carryover and sandblasting
- • Overall simple design – fewer moving parts, more uptime
Product Overview
Elgin regenerative air sweepers give contractors, municipalities, and airports a powerful sweeper with versatility and productivity. The Elgin® Crosswind1® efficiently cleans large flat paved areas such as streets, parking lots, and airport runways. Mounted on the short-wheelbase of either conventional or cab-over chassis, the Elgin Crosswind1 is operated by simple rocker switches and equipped with all the essentials to get the job done right. A combination of a large 8 yd3 (6 m3) hopper and 240 gal (908 L) water tank, plus excellent fuel efficiency, allow maximum productivity between trips to dumping, re-watering, and fueling.
The Crosswind1 steps ahead as the market leader with innovative single-engine technology. This new easy-to-use design, with single-button operation, will increase productivity and decrease maintenance time and costs. The Crosswind1 sweeper is also effective in the frequent maintenance of permeable pavement. This sweeper is versatile and can easily pick up litter and chip seal. The large pickup head makes it desirable for many applications.
Why Crosswind
- • Superior dust suppression
- • Tilt body for traditional dumping of sweepings
- • Dual-engine platform with patented SharedPower technology available
The Crosswind1 Eliminates:
- • Maintaining two engines
- • Complex aftertreament system, and maintenance
- • Untimely auxiliary engine regenerations
- • Cost exposure resulting from “missed” auxiliary engine regenerations
- • Cumbersome belt tensioning systems
- • Auxiliary engine noise and vibration
Product Overview
The Elgin Innovation Team traversed the country, speaking to hundreds of customers at all levels within the street sweeping industry, both municipal and contractor, in pursuit of true voice-of-the-customer insights. Extensive real-world prototype testing and feedback refined the sweeper design to provide customers with exactly what they want and need while proving reliability and durability along the way. The input of service technicians, operators, and street sweeping supervisors shaped every detail of the new RegenX® mid-dump regenerative air street sweeper from Elgin Sweeper Company, a sweeper that is easy to use, easy to clean, and easy to maintain but still delivers the quality and proven technology that is the hallmark of Elgin Sweeper products.
The new RegenX was built by Elgin, but designed by you.
Why RegenX
- Available on Non-CDL*, 26K GVW Chassis
- • *May vary based on local rules and regulations.
- Roll-Off Dump Height with 50° Dump Angle and 8yd3 Hopper
- • Avoid double-handling, driving back to the facility to dump, and environmental ground-dumping restrictions
- Incredibly Easy to Clean
- • Simple hopper – rounded corners and external self-dumping dust separator
- • Easy-access washout doors for dust separator and pickup head
- • Cable-controlled drop-down screens standard
- Easy to Service
- • Easy to access components with locations determined by experienced service technicians
- • Bolt-on wear parts wherever possible (dust separator, hopper inlet, etc.)
- • Simple design with no control modules for sweeper functions
- Reliable
- • Better cleanout and easier serviceability leads to more reliability
- • Highly efficient dust separator and large screen surface area reduce carryover and sandblasting
- • Overall simple design – fewer moving parts, more uptime
Product Overview
The Elgin innovation team traversed the country, speaking to hundreds of customers at all levels within the street sweeping industry, both municipal and contractor, in pursuit of true voice-of-the-customer insights. Years of real-world prototype testing and feedback refined the sweeper design to provide customers with exactly what they want and need while proving reliability and durability along the way.
The input of service technicians, operators, and street sweeping supervisors shaped every detail of the new RegenX1® mid-dump regenerative air street sweeper. Easy to use, easy to clean, and easy to maintain while delivering the quality and proven technology that is the hallmark of Elgin Sweeper products.
The new RegenX1 was built by Elgin, but designed by you.
SINGLE-ENGINE 4 WHEEL VACUUM SWEEPER
ELIMINATES:
- • Maintaining two engines
- • Complex aftertreatment system and maintenance
- • Untimely auxiliary engine regenerations
- • Cost exposure resulting from “missed” auxiliary engine regenerations
- • Cumbersome belt tensioning systems
- • Auxiliary engine noise and vibration
Reliable, Serviceable, Simple.
Why RegenX1
- Roll-off Dump Height with 50° Dump Angle and 8 yd3 Hopper
- • Avoid double-handling, driving back to the facility to dump, and environmental ground-dumping restrictions
- Incredibly Easy to Clean
- • Simple hopper – rounded corners and external self-dumping dust separator
- • Easy-access washout doors for dust separator and pickup head
- • Cable-controlled drop-down screens standard
- Easy to Service
- • Easy to access components with locations determined by experienced service technicians
- • Bolt-on wear parts wherever possible (dust separator, hopper inlet, etc.)
- Reliable
- • Better cleanout and easier serviceability
- • Highly efficient dust separator and large screen surface area reduce carryover and sandblasting
- • Overall simple design – fewer moving parts, more uptime